Sprinkler Problems and How to Fix Them

lawn water sprinkler

Sprinkler Problems and How to Fix Them

To maintain a healthy lawn, you need to water the plants, and a working irrigation system brings a lot of conveniences. If you need help because it doesn’t work now, the best sprinkler repair in Sandy, Utah, and other cities will save your day.

There are some sprinkler issues that property owners often experience. You must be familiar with sprinkler problems and the way you can fix them.

Broken Sprinkler Heads

One of the essential components of an irrigation system is the sprinkler or spray head. Since the irrigation system has been invented, sprinkler heads are grouped into two broad types — spray sprinkler and rotor sprinkler. But now, various technologies are available on the market to suit your particular needs.

  • Spray sprinkler: This device sprays a fan-shaped pattern of water. Spray sprinklers operate in 20 to 30 PSI of water pressure. Depending on the sprinkler nozzle used, you can achieve the desired radius of the water throw. Whether you have a narrow or wide area, your lawn will receive adequate moisture through the spray sprinkler.
  • Rotor sprinkler: If you need a system that can rotate streams of water back and forth, a rotor sprinkler is the right choice. There’s also a rotor sprayer that can do the watering in circles over the landscape. Predecessor models are bigger compared to what you can see now in the market. Modern rotor sprinklers now are smaller, very quiet, and require less maintenance.
  • Rotary nozzle: In recent years, sprinkler heads have been improved. The rotary nozzle can put out multiple streams of water as it rotates and is installed on a stationary spray build.

Sometimes, spray heads get damaged when lawnmowers or other vehicles accidentally drive over them. When this happens, your sprinkler head might not pop up and the lawn won’t receive the water it needs. Your solution is to fix the head if it’s still doable. If not, you can easily find the correct replacement sprinkler head on the market.

Clogged Sprinkler Heads

closeup of sprinkler head watering grass

You have been very busy with something else, such as artworks, office duties, etc., and later on, you noticed that a portion of your lawn has turned yellow. As far as you can remember, you’re sure that the water has been coming out from the sprinkler every time you turn the system on.

In this situation, it would be better to check the sprinkler head. The head might be clogged with dirt, sand, and other debris. Sprinkler heads have filters and most of them require a minimum filtration of 80 mesh.

In a worst-case scenario, the sprinkler head doesn’t rise and there’s no water coming out. Here’s how to fix it:

  • Lift the pop up riser.
  • Take out the nozzle and the filter.
  • Clean the filter.
  • If the filter is busted, buy a replacement.

The Timer Dial Malfunctions

The automatic sprinkler system has become a favorite of most homeowners. It brings a lot of benefits while you’re doing a more important matter. Here are the typical concerns linked to malfunctioning timer dials:

  • The controller is not working.
  • The controller works, but it fails to keep time.
  • The controller doesn’t switch to manual mode or programmed mode.
  • The clock motor works, but the time ideal is malfunctioning.

Things that you must check:

  • See if the power source is working.
  • Check if the proper voltage goes to the motor.
  • The drive gear situated behind the time dial may be busted, so this is something that you should check as well.
  • Check if the time dial moves clockwise. If not, a replacement is necessary.

It’s highly recommended to do the maintenance of your irrigation system regularly. Whichever period that works for you, you can do the inspection and maintenance every month, mid-season, or end of the season. If you need further assistance, don’t hesitate to call the experts to save time, money, and effort.

Scroll to Top